Robert arrived at ISB at 9:15. The doors were open but no sample had been collected. The top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.

Robert arrived at LML at 9:15. The doors were open but no sample had been collected. The top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.

Robert arrived at LML at 9:15. The front door to the collector had not opened but the back one had. The solenoid was adjusted in an attempt to remedy the problem and then tested successfully several times.

Robert arrived at LML at 9:15. The doors were open but no sample had been collected. The jar had disconnected from the collector. It was reattached and the top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.

Robert arrived at ISB at 10:15. The doors were open but no sample had been collected. The top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.

Robert arrived at LML at 5:30 PM. The area was closed and the collector was unable to be serviced today.

Robert arrived at LML at 9:00. The doors were open but no sample had been collected. The top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.

Robert arrived at ISB at 10:00. The doors were open but no sample had been collected. The top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.

Robert arrived at ISB at 8:30. The doors were open but no sample had been collected. The top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.

Robert arrived at ISB at 8:30. The doors were open but no sample had been collected. One of the strand frames came untied so only 2 frames are currently in the collector. The top plate, drip tray and the strand frames were removed and washed with 409 and DI. The inside of the collector was also rinsed with DI water. The system was reset for another sample.